Granit 1981i

CARACTERÍSTICAS

Product Type: Wireless Industrial Full-Range Area-Imaging Scanner
Light Source: Illumination LED 617nm / Aimer Laser 650nm
Host System Interfaces: Multi Interface /USB / RS232 (TTL +5V, 4 Signals) / Keyboard Wedge
Dimensions (Length/Width/Depth)Weight (grams): Scanner 133 mm x 75 mm x 195 mm/214g , Base 250 mm x 103 mm x 65mm /290g
Operating Power Base: 5 W (1A @ 5 V)
No Charging Power: 0.6 W (0.12A @ 5 V)
Operating Temperature: Scanner -20°C to 50°C / Base -20°C to 50°C
Humidity: 0 to 95% relative humidity, non-condensing
Drop: Scanner – Designed to withstand 50 2 m drops to concrete at -20°C
5,000 1m tumbles / Base – Designed to withstand 50 1.2 m drops to concrete at -20°C 5,000 1m (40˝) tumbles
ESD Tollerance: Up to 20kV direct air / Up to 8kV inderect coupling plane
Envirionmental Sealing: Scanner IP65 / Base IP51
Light Levels: 0 to 100,000 lux (9,290 foot-candles)
Scan Pattern: Area Imager (1280 x 800 pixel array)
Resolution: 3 mil 1D / 6.6 mil 2D
Scan Speed: 30 Frames Autoadaptive
Motion tollerance: N/A
Scan Angle: 13.5° Typical
Print Constrast: 40% minimum reflectance difference
Pitch, Skew: N/A
Decode Capability: See the Decode Table
Reading Distance : min 11 cm on 10 mil barcode / max 1500 cm on 100 mil barcode
Image Capability: Image size 1280 x 800 pixels / Multi Gray Scale
Radio Range:2.4 to 2.5 GHz (ISM Band) Adaptive Frequency Hopping  / Bluetooth v2.1: Class 1: 100m line of sight
Data Rate (Transmission Rate): Up to 1 Mbit/s
Battery: 2000 mAh Li-ion minimum
Number of scan: Up to 50,000 scans per charge
Expected Hours of Operation: 14 hours
Expected Charge Time: 4,5 hours
Accessories: Battery Charger 4 bay , Holder vehicle/forklift, Belt Holster, Take up reel/balancer
Software: EZConfig